Roclas Laser FAQ

Can it process highly reflective materials such as copper and aluminum?

Yes, it supports this. Equipped with a high-reflectivity suppression module, it can stably process 1-2mm copper plates and 2-3mm aluminum plates.

Does the equipment require a dedicated workshop?

 No dedicated workshop is needed. Only a 380V power supply and a ventilated environment are required. The equipment comes with a built-in smoke purification system.

Can the fiber laser machine bed be manufactured as a single piece or with a modular design?

The manufacturing process is the same as for a single-piece design, but it doesn't require welding; it uses screws for connection, allowing it to be separated into different parts.

Shipping method:

Sea, land, and air freight; wooden crates/bare packaging, full container/less than container load (LCL)

Working principle of CO2 laser machine:

CO2, as an inert gas, generates a laser beam under the stimulation of high-voltage electricity for cutting. Fiber laser uses fiber optic transmission. Nitrogen is an inert gas, non-combustible and anti-oxidizing. Oxygen is a combustion-supporting agent.

Will cutting certain materials damage the laser and laser head?

Laser machines should avoid cutting highly reflective materials such as aluminum and copper, as these materials can damage the laser and laser head.

What measures should be taken to prevent the laser from penetrating the sheet metal when using a high-power laser machine?

Fiber laser machines above 6kW require fire-resistant bricks and high-temperature resistance to prevent the laser from penetrating the sheet metal.

How to choose a laser machine for cutting coated sheet metal parts?

When cutting coated sheet metal parts, a high-power fiber laser machine should be chosen.

How does a laser machine provide area protection?

Laser machines can also be equipped with safety light curtains. If someone enters the processing area, the laser machine will stop processing.

What is the weight limit of tubes that a tube cutting machine can cut?

Tube cutting machine (without support between the chucks) can cut tubes weighing up to 300 kilograms.

 What are the differences in cutting between a CO2 hybrid cutting machine and a CO2 laser machine?

A CO2 hybrid cutting machine can cut flat and uneven metal materials, but cannot cut uneven non-metallic materials. A CO2 laser machine with a follow-up system can cut uneven non-metallic materials (because metals are conductive, allowing for capacitive signal feedback).

How to choose a laser system and laser head?

It is best to choose a laser system and laser head from the same brand for better stability.

How to set up the laser machine's automatic lubrication pump?

The laser machine's automatic lubrication pump is defaulted to lubricate every 200 minutes for 25 seconds each time, which is adjustable.

Thickness that a 12kw laser machine can cut with different gases:

With nitrogen and air, the ideal setting for a 12kw laser machine is 10mm, but with proper parameter adjustments, it can cut up to 15-16mm. With oxygen, it can cut up to 40mm.

Four functions of a four-in-one welding machine:

Welding, cutting, cleaning, and weld seam cleaning.

Common diameters for laser tube cutting machines

170 240 350

What if the fiber laser machine and Air compressor are too far from the machine?

We need to replace the air hose with a high-pressure resistant hose, because ordinary hoses will bulge due to the distance.

The laser machine will have reserved N2 and O2 gas lines.

The laser machine will have reserved N2 and O2 gas lines.

How does a fiber laser machine achieve batch processing?

The fiber laser machine can achieve batch processing by setting MARK point 1 to determine a consistent processing origin.

The processing speed of a 3kw laser machine cutting 16mm carbon steel is

0.8m/min

How to adjust the tube cutting machine when switching between large and small diameter pipes?

When switching between large and small diameter pipes on the tube cutting machine, the chuck screws need to be manually disassembled and moved.